ComboCurve.Api.Model.TypeCurveLookupTableCondition

Properties

Name	Type	Description	Notes
Key	string	Well header key to filter on. The value type must match the header type. String headers: api14, dataPool, dataSource, inptID, mostRecentImportType, aries_id, basin, county, current_operator, geohash, hole_direction, landing_zone, lease_name, pad_name, play, primary_product, state, status, township, type_curve_area, well_name, mostRecentImportDesc, chosenKeyID, abstract, allocation_type, api10, api12, block, completion_design, country, current_operator_alias, current_operator_code, current_operator_ticker, district, drillinginfo_id, elevation_type, field, first_frac_vendor, first_treatment_type, flow_path, fluid_type, gas_gatherer, ihs_id, lease_number, ngl_gatherer, oil_gatherer, parent_child_any_zone, parent_child_same_zone, phdwin_id, previous_operator, previous_operator_alias, previous_operator_code, previous_operator_ticker, prms_reserves_category, prms_reserves_sub_category, prms_resources_class, production_method, proppant_mesh_size, proppant_type, range, recovery_method, refrac_frac_vendor, refrac_treatment_type, rig, rseg_id, section, subplay, survey, target_formation, tgs_id, spgci_id, toe_in_landing_zone, toe_up, well_number, well_type, monthly_or_daily, combo_name, dataSourceCustomName, custom_string_0 through custom_string_34 Numeric headers: acre_spacing, azimuth, bg, bo, bubble_point_press, casing_id, choke_size, dew_point_press, distance_from_base_of_zone, distance_from_top_of_zone, drainage_area, elevation, first_additive_volume, first_cluster_count, first_fluid_volume, first_max_injection_pressure, first_max_injection_rate, first_prop_weight, first_stage_count, first_test_flow_tbg_press, first_test_gas_vol, first_test_gor, first_test_oil_vol, first_test_water_vol, footage_in_landing_zone, formation_thickness_mean, fracture_conductivity, gas_c1, gas_c2, gas_c3, gas_co2, gas_h2, gas_h2o, gas_h2s, gas_he, gas_ic4, gas_ic5, gas_n2, gas_nc10, gas_nc4, gas_nc5, gas_nc6, gas_nc7, gas_nc8, gas_nc9, gas_o2, gas_specific_gravity, gross_perforated_interval, ground_elevation, heelLatitude, heelLongitude, horizontal_spacing, hz_well_spacing_any_zone, hz_well_spacing_same_zone, initial_respress, initial_restemp, landing_zone_base, landing_zone_top, lateral_length, lower_perforation, matrix_permeability, measured_depth, num_treatment_records, oil_api_gravity, oil_specific_gravity, percent_in_zone, perf_lateral_length, porosity, refrac_additive_volume, refrac_cluster_count, refrac_fluid_volume, refrac_max_injection_pressure, refrac_max_injection_rate, refrac_prop_weight, refrac_stage_count, rs, sg, so, stage_spacing, surfaceLatitude, surfaceLongitude, sw, thickness, toeLatitude, toeLongitude, true_vertical_depth, tubing_depth, tubing_id, upper_perforation, vertical_spacing, vt_well_spacing_any_zone, vt_well_spacing_same_zone, zi, first_proppant_per_fluid, refrac_fluid_per_perforated_interval, refrac_proppant_per_fluid, refrac_proppant_per_perforated_interval, total_additive_volume, total_cluster_count, total_fluid_volume, total_prop_weight, total_proppant_per_fluid, cum_boe, cum_boe_per_perforated_interval, cum_gas, cum_gas_per_perforated_interval, cum_gor, cum_mmcfge, cum_mmcfge_per_perforated_interval, cum_oil, cum_oil_per_perforated_interval, cum_water, cum_water_per_perforated_interval, first_12_boe, first_12_boe_per_perforated_interval, first_12_gas, first_12_gas_per_perforated_interval, first_12_gor, first_12_mmcfge, first_12_mmcfge_per_perforated_interval, first_12_oil, first_12_oil_per_perforated_interval, first_12_water, first_12_water_per_perforated_interval, first_6_boe, first_6_boe_per_perforated_interval, first_6_gas, first_6_gas_per_perforated_interval, first_6_gor, first_6_mmcfge, first_6_mmcfge_per_perforated_interval, first_6_oil, first_6_oil_per_perforated_interval, first_6_water, first_6_water_per_perforated_interval, last_12_boe, last_12_boe_per_perforated_interval, last_12_gas, last_12_gas_per_perforated_interval, last_12_gor, last_12_mmcfge, last_12_mmcfge_per_perforated_interval, last_12_oil, last_12_oil_per_perforated_interval, last_12_water, last_12_water_per_perforated_interval, last_month_boe, last_month_boe_per_perforated_interval, last_month_gas, last_month_gas_per_perforated_interval, last_month_gor, last_month_mmcfge, last_month_mmcfge_per_perforated_interval, last_month_oil, last_month_oil_per_perforated_interval, last_month_water, last_month_water_per_perforated_interval, month_produced, first_fluid_per_perforated_interval, first_proppant_per_perforated_interval, total_fluid_per_perforated_interval, total_proppant_per_perforated_interval, total_stage_count, before_income_tax_cash_flow, first_discount_cash_flow, gas_breakeven, gas_shrunk_eur, gas_shrunk_eur_over_pll, irr, ngl_shrunk_eur, ngl_shrunk_eur_over_pll, nri_oil, oil_breakeven, oil_shrunk_eur, oil_shrunk_eur_over_pll, payout_duration, undiscounted_roi, wi_oil, custom_number_0 through custom_number_19 Date headers (use YYYY-MM-DD format): completion_end_date, completion_start_date, date_rig_release, drill_end_date, drill_start_date, first_prod_date, gas_analysis_date, mostRecentImportDate, permit_date, refrac_date, spud_date, til, first_prod_date_daily_calc, first_prod_date_monthly_calc, last_prod_date_daily, last_prod_date_monthly, econ_first_production_date, econ_run_date, custom_date_0 through custom_date_19 Boolean headers: generic, copied, has_daily, has_monthly, has_directional_survey, custom_bool_0 through custom_bool_4 Project Custom Headers: _project_custom_header, _project_custom_header_1 through _project_custom_header_49 (type depends on project configuration - must be configured in the project before use)
Operator	string	Comparison operator. - `equal`: Value equals the specified value - `not_equal`: Value does not equal the specified value - `greater_than_equal`: Value is greater than or equal to the specified value (numeric/date) - `less_than_equal`: Value is less than or equal to the specified value (numeric/date) - `in`: Value is in the specified array of values - `not_in`: Value is not in the specified array of values
Value	Object	Value to compare against. Must match the header type: - String headers: string value (e.g., \"Permian\") - Numeric headers: number value (e.g., 5000) - Date headers: date string in YYYY-MM-DD format (e.g., \"2020-01-01\") - Boolean headers: boolean value (true or false) - For `in` and `not_in` operators: array of values of the appropriate type

[Back to Model list] [Back to API list] [Back to README]